Pet Cemetery Project 2021

Model Railroading has taken a back seat lately to a few pleasant distractions.  A surprise visit from in-laws led to a flurry of overdue cleaning and straightening, a late honey harvest needed to be bottled with wax to clean and process, and most enjoyable of all, my oldest son and I returned to the annual work of building tombstones for our family Pet Cemetery.  

The core of the tombstones shown in the photos above were given to me by a neighbor in Washington State.  He used to set up a big graveyard in his lawn each September for Halloween.  Yes, he started setting up a month early since he didn't get around so easily and he had that many props.  People used to come from all over to see it.  Naturally we had to get into the business as well, so rather than compete with another human graveyard, we chose to plant a Pet Cemetery.

Being a kitbasher at heart, I can't just plunk down any old pre-made prop.  Where's the fun in that?  So, I take the pre-made foam stone and add bulk to increase the thickness.  Sometimes I'll carve away parts to change the shape, as in the first picture, or I'll add more to widen it or create a thicker base.  For larger stones I'll insert PVC pipe into the base so the stone can slip over rebar, or drill holes in a wooden base to pin it to the ground with 12" ground nails.  

Once the rough construction is done we will mix a batch of paper mache' clay following Scott Stoll's recipe (www.stolloween.com) and begin applying it all over, taking care to maintain the pre-carved details we want to keep.  In the past we've carved letters into the face.  This year, however, I purchased some plastic fridge-magnet letters from a local thrift store which we hot-glued to the stones (not seen in the photos).  They'll be covered with the paper mache' mix, minus the paper.  When all that's dry, after any carving, the stones are painted and sealed.

Unfortunately due to the other aforementioned events, the construction of our two stones we planned to add this year was delayed.  Still, we set up the cemetery at our church for the second-annual COVID Halloween drive-thru.  Right now we're still applying the paper mache' coating, with carving and painting yet to come.  Maybe by Christmas they'll be done.  It is not a quick process, taking about a month from start to finish working a little each evening a few times a week.  That's fine, as it is good father-son craft time and the resulting object becomes a memorial to those good times.