Peak Peeve

Okay, this may sound like a criticism, because it is.  However, I offer it in the most constructive and encouraging spirit so please take it as such.  I have a pet peeve when it comes to how modelers treat the roof ridges of their structures.  Too often have I seen what is clearly outstanding work and thoughtful effort put into a model building only to cap it off, literally, with an unprototypical folded strip of paper or some such shortcut, which is then weathered to match the shingles.  No.

If you're going to shingle a roof, the cap shingles along the ridge need to be just that - individual cap shingles laid according to prototype practice.  Modern homes sometimes have a metal ridge cap over composite shingles, but that's not what I'm talking about.  If you are modeling a metal roof, then a folded strip of paper or styrene painted to match the rest of the roofing material is perfectly acceptable.  But, if you're modeling an earlier era of shingled roofing then there might be another option - the decorative ridge trim.

Here again however is another tempting trap - to just stand the trim along the ridge by itself.  WRONG.  These ornate trim features found on Victorian structures were made to not only add character to the structure but also protect the ridge.  The trim was flanked by flashing that supported the ornate vertical piece and rested on the top row of shingles on each side of the ridge.  Typically it was cast as one piece or built up to make one unit which was attached to the ridge.

This is easily modeled as I have done by painting paper strips to match the trim and gluing them in place.  Simple.  After all have been applied I will go over the trim and strips with a second coat of paint to cover any imperfections.  In this photo you can hopefully see the strips applied beneath the ridges in the front while the others in the back do not yet have it.  The strip in this case is 1/16" wide (high) and trimmed to fit, in order to give the right "reveal" to the shingles below.  The paper material is basic brown paper bag, the same as the shingles.

Admittedly we all pick and choose.  We all decide for which details we will pursue prototype fidelity and on which details we will compromise.  Track is perhaps the most common example.  How many layouts have you visited where the rail was either left unpainted or painted a garish rusty red?  And joint bars or turnout details?  I suspect most folks don't add them, but running trains draws the eye to the track and really well done track detail looks terrific. 

I suspect we've become accustomed to seeing less-detailed track in the same way we accept a strip of folded paper as a ridge cap on a shingled roof.  A quick image search for "decorative ridge trim" will bring many prototype examples and the solution to the problem is, in this case, pretty simple.  I think it looks pretty good, too.