Photo Finish

The photo studio section of the Ensminger Brothers building is mostly complete, lacking only window glass, final weathering, and perhaps some signage.  A fence running between the brick building and wood entry will be added when the structure is installed on the layout, but I'm getting ahead of myself.  Here are some progress images showing how I built the roof, added shingles and painted the structure.

I used dense file folder material for the roof panels.

Normally I don't like Campbell shingles but they work well here.

I chose an aged white and slate blue for the walls and trim, with a dark mudstone for the stairs and a lighter mudstone for the shingles.  The shingles and stairs received a dark brown wash while the walls received a mudstone wash.  I used charcoal black for the roofing paper, then lightened and streaked for an aged appearance.  

In the third image you can also see the brick walls have received a mortar treatment.  I sealed the paint then applied joint compound, pressing it into the mortar lines.  This can be removed carefully from the surface of the bricks using a damp sponge.  In this case I wanted a sloppy application as seen on the prototype so I was careful to not wipe away too much.  This stands in contrast to the clean look of the facing brick, though most of that brick is hidden by the veranda.

Speaking of the veranda, it received some paint as well.  Moss green for the base coat (applied with a spray can) and cactus green craft paint.  In this image the parts need a second coat of the cactus green.

 Up next, masking and painting the remaining windows and doors!  Entering the home stretch...