Photo Finish

The photo studio section of the Ensminger Brothers building is mostly complete, lacking only window glass, final weathering, and perhaps some signage.  A fence running between the brick building and wood entry will be added when the structure is installed on the layout, but I'm getting ahead of myself.  Here are some progress images showing how I built the roof, added shingles and painted the structure.

I used dense file folder material for the roof panels.

Normally I don't like Campbell shingles but they work well here.

I chose an aged white and slate blue for the walls and trim, with a dark mudstone for the stairs and a lighter mudstone for the shingles.  The shingles and stairs received a dark brown wash while the walls received a mudstone wash.  I used charcoal black for the roofing paper, then lightened and streaked for an aged appearance.  

In the third image you can also see the brick walls have received a mortar treatment.  I sealed the paint then applied joint compound, pressing it into the mortar lines.  This can be removed carefully from the surface of the bricks using a damp sponge.  In this case I wanted a sloppy application as seen on the prototype so I was careful to not wipe away too much.  This stands in contrast to the clean look of the facing brick, though most of that brick is hidden by the veranda.

Speaking of the veranda, it received some paint as well.  Moss green for the base coat (applied with a spray can) and cactus green craft paint.  In this image the parts need a second coat of the cactus green.

 Up next, masking and painting the remaining windows and doors!  Entering the home stretch...

Photo Studio Walls and First Colors

In the post "Scratch That" I talked about my choice to scratchbuild the wood extension to the Ensminger Building, the actual photo studio or gallery used by the Ensminger Brothers.  Before getting into the modeling progress, here's a brief word on these men whose name I've been bandying about in recent posts.  This page covers their early history and roots in Iowa:

http://www.pioneerphotographers.com/files/Iowa/Ensminger.html 

More relevant to the structure I'm modeling, is this information from the Orange County Regional History Center:

"The Ensminger brothers were two of the most prominent 19th-century photographers in Central Florida. They moved from Iowa to Florida in time to photograph American troops stationed in Tampa in preparation for the Spanish-American War. In 1884 or 1895, Jefferson Clay Ensminger moved to Sanford, where he opened a photography studio with his brother on the west side of North Park Avenue, just a few blocks from the St. Johns River. J.C. Ensminger was known to be friends with Henry Sanford as well as the official photographer of Henry Plant’s Railway System." 

Now back to the model making.

I used V-groove styrene siding to make the walls.  This was a bit fiddly as I hadn't planned for the corner posts in my measurements and had to allow for it or trim off the ends.  That was made more challenging by the odd dimensions of the pitched roof section.  I carefully built up the wall with the large windows before taping the glass itself (cast into the window frame...grr...) in order to prime.  Once the walls were assembled I did just that, giving it all two thin coats of gray.

After the first light coat of primer.

I also managed to paint the brick structure at my local gaming store's paint night.  I usually bring Star Wars Legion minis, but from time to time I raise some eyebrows (in a good way) by bringing something in HO scale.  For the common brick I used a blend of Georgia Clay and a red color, lightening first with tan and then orange for the successive highlight colors.  For the facing brick on the facade I used a Brown Iron Oxide, darkened with a dark chocolate brown for variation.  Here's the result:

The mortar will come later in the process, closer to final assembly.  I spent last night getting the doors sorted.  I've also made great progress on the veranda and side porch which will be featured in an upcoming post.  Thanks for following along.  Happy Modeling!

Scratch That

With the facade complete I took the next steps to assemble the core of the brick structure; applying brick texture to the back of the cornice, filling gaps with putty and creating a peak on the rear wall.  Next I assembled the walls using the kit-supplied alignment pegs and mid-level brace.  This is a nice way of ensuring the walls are plumb and square; thanks, Kibri!

Next I could begin pondering how I'd construct the photo studio add-on.  I had originally planned to use a Life-Like General Store, a structure I had kitbashed once before, years ago.  I nixed this idea because of the windows; there are too many on the kit and the prototype only has a handful.  

Test fitting with the Life-Like components gave me a feel for the relative size of the add-on and revealed an interesting geometry.  Placing the peak of the studio roof in line with the second story door then aligning the back studio wall with the side wall of the brick structure means that studio wall is slightly higher than the rest.  Based on the photos I have I suspect this was the case for the prototype structure.  Enlarge the photo below and trace the planks along the wall that says "Photograph Gallery", to see what I mean.

With these factors in play I decided to scratchbuild the studio using v-groove styrene sheet and window castings from my collection of parts.  My first order of business was to double check the fit of the structure in place on the layout.  Then I could begin making a simple-enough drawing to provide the necessary data to begin cutting parts.

The green framed windows came from the Grocery store kit and will need to be masked before I can prime them, as they're cast with the clear plastic and green plastic in one piece.  The metal windows are of unknown origin, though I suspect they're Alexander.  My brick structure isn't as wide as the prototype, so my high studio wall will be higher than the original, but that's okay.  This sort of situation is part of the fun of kitbashing, when reality suggests something out of the ordinary.  

I genuinely believe that the limitations imposed by real-life situations often produce more interesting models than we can imagine.  Studying photos of real places builds a library of possibilities which we can access to create realistic models with great interest.  Just as the freelancer studies real locomotives to produce a plausible steam engine for their pike, so to the kitbasher (and kit designers!) must study real structures so that their creations have a ring of authenticity.

A Fancy Facade for the Ensminger Building

Work on the Ensminger Building continued yesterday, making a start on the facade.  Studying the photo of the prototype I made a quick sketch on graph paper of the details as built, then simplified it into the basic outline, shape and form.  Satisfied that I could match the overall impression, I dove into the kit-mingling with abandon as if possessed by the spirit of Art Curren himself.  

Open this image in a new tab for a really big view.

I had previously gathered potential donor material for the ornate brick cornice and brought out those bits. I began by sawing away the detail from the cornice of the AHM Fire House.  The upper section split in two and flipped vertically would create the dental bits on either side of my facade, framed between bonus brick pillars from the Grocery store...more on that in a minute.  The lower sections would provide more dental detail for the four pillars of the cornice.

The green bit is the original kit cornice; lovely, but not what I want.

An unknown source provided the peaked section in the center, filed and cut to give a sawtooth look.  I drilled and enlarged ventilation holes in a pattern on that section following the prototype's example.  Additional vertical brick bits from the Fire House wall were added here and there.  In the end this is what it looked like:

Pleased with this result I returned to the bench after dinner and pondered the storefront.  The prototype is loaded with details I'd love to include.  However, since I am trying to stay within the donor kit's boundaries for the sake of time and resources, I have to live with the limitations this imposes.  I decided to correct one element, turning the four-pane display windows into something closer to the prototype though still far from accurate.  

To do this I'd need to cut away the window muntins to make a large plate glass window.  Still, if I could recreate that stained glass look above the large windows, that'd be even better.  Digging through my windows collection I found some very fine N scale windows I honestly thought I'd never use.  Never say never, and keep everything.  These little gems were a near-perfect fit into the kit window openings.

I cut away the kit's horizontal muntins and cut away three panes from the N scale windows.  Then I glued in the N scale windows from behind and reattached the muntins beneath, now as mullions.  Once that had set up I cut away the remaining vertical muntin.  Here is the result, set beneath the upper story facade:

Now a word about "bonus parts" and the problems with this kit.  Full disclosure; when I worked at Walthers part of my job was writing kit instructions.  Spend enough time reading model train discussions online and you may find someone complaining about Walthers kit instructions.  I'm not spilling any trade-secret beans to say they're aware of this.  One of the complaints you might find out there is the problem of "bonus parts", or a sprue with too many parts leaving the modeler unsure if they've built the kit correctly.  This kit is no exception, with several sprues of windows, doors and walls that aren't used in the grocery store building.

Here's part of the problem: this structure didn't start life as a Walthers kit.  It is most clearly a Kibri kit, utilizing parts from their product line (one part is even stamped "Kibri").  Kibri 38393, the ice cream parlor, uses the same side panels - and construction method - as Lee's Grocery and Lee's includes the storefront and windows from Kibri 38393 in its box though they're not needed for the grocery store.  Got it?  Good.  As a result the modeler, having completed Lee's Grocery, will be left with an assortment of parts for their bits box.  There's nothing on the instruction sheet to indicate this.  This can be needlessly confusing and a single line of text calling out the extra parts would go a long way towards helping resolve this issue.

Admittedly it's not a big deal for most modelers.  We can figure it out.  For kitbashers, the leftover parts are a boon.  As mentioned above I used a "bonus" short wall section to create the brick pillars for the cornice and I'll be using the windows and doors, not designed for this structure, to create doors for the upper floor veranda access.  I'm not criticizing Walthers for this; in my last post I commented on Scale Structures Limited's creative use of parts to make the gazebo (it appears "The Store" might be the original kit those parts were intended for, though even then they're cut apart.  Curious to see those instructions...).  A person could argue that economy of scale and creative re-use of parts go hand in hand and keep us modelers supplied with kits at a reasonable price.  I'll buy that.

 

The Back Door and The Signs, with special guest, AI

I felt bad for the back wall of the Candy Shop after talking it up in the previous post but not sharing an image.  So, I took a picture of the wall to show its concrete stoop and details as well as a couple close-up shots of the posters.  The little vent fan on the wall is from Vector Cut, sadly, now out of production.  The rest are metal castings of unknown origin.

Why wasn't this included in the kit? (and why isn't the door inset?)

You can still get coffee at the candy shop.  The little face is a period-accurate election poster.

The roof was stippled but painting that brick was a back-and-forth process that took forever.

But I'm burying the lead here...after a conversation with Jim at 30 Squares I decided to play around with AI to generate a sign.  I used Canva, as it was the first search result returned.  The process was super easy, turning text into an image.  Here's the prompt I used:

Rooftop Sign for a 1920s business called the "Lemon Drop Candy Shop" featuring a large lemon with leaves and the text "Lemon Drop Candy Shop" in a period appropriate typeface

Here are the results that I liked best:

WOW.  I had thought I'd get a graphic, not a photo-realistic image.  But boy am I glad I didn't get what I expected.  Novelty architecture really became popular in the 1920s and 30s and these signs are a nod to that style, perfect for my railroad's era.  It wouldn't be too hard to make a big lemon out of Milliput along with some stylized leaves.  The large panel means the text could be used on both sides for a ridge-line sign.  I've got some raised styrene letters, though I might search around for a different typeface for variety's sake.  

This is exciting.  Happy modeling, and thanks for reading.

 

From Coffee to Candy

This is a post I've been waiting to make and the reason may be more interesting than the result.  You see, for a short while I worked remotely for Wm. K. Walthers, Inc. as a copywriter.  One of my tasks was writing kit instructions, and this kit is "one of mine".  Since I live in California and Walthers' headquarters is in Wisconsin, I was sent pre-production samples in order to assemble them and get a feel for any difficulties or challenges a modeler might have when assembling the kits.

I completed this handsome little building almost exactly one year ago, however the kit wasn't available to purchase until recently so I had to sit on the pictures until then.  Since this structure could easily fit into my 1920's era I decided to complete it and add some interior detail, just for fun.  The multi-pane windows means much of that detail won't be visible, even when lit, but I have left the roof removable - easily done in this kit due to the one-piece roof - so that the interior can be shown to visitors.  

I added a little concrete pad to the rear entrance (not shown) and used it as a place for adding exterior details such as a trash can, bottles, etc.  I'm not sure why it wasn't included in the kit as the door sits high above the foundation otherwise.  My sample didn't come with any signs but I believe the kit does; I chose a few from my stock that work for my interpretation of the structure.  As marketed by Walthers it is a coffee shop, however, it could easily be repurposed for any number of uses.  I chose to make mine a candy shop.  Ocala had one back in the old days called the "Candy Kitchen".  When I get around to making a sign for mine it will be the "Lemon Drop Candy Shop", to help anchor it in Florida.

The interior was made mostly from scratch, with only the sink, chairs, fruit basket and a few cans on the shelves from castings.  I'm most proud of the glass case and the scale on the counter.  The scale is a replica of a "Toledo" type counter scale, a detail I imagined would be useful in a candy shop.  I don't know if they came in red, but I like it and it stands out.  The "tile" floor is made from the interior pattern on a security envelope; I collect these for just this sort of purpose.  The colored plates under the candy in the case are cut from a printed cereal box; they're the color registry circles for the print inks.  The candy is simply construction paper cut into bits.  

Without going into the details, the copywriter position at Walthers was eliminated and we amicably parted ways last summer.  However, during my time there I was sent a small pile of kit samples and no doubt more of these will make their way onto the layout - Lee's Grocery is the next one to be used as the Ensminger building, though I didn't write the instructions for that kit...why I have that kit is a different story for another time.  I'm still debating if the Candy Shop will have a home at Ocala Springs or elsewhere.  I'm just glad I can finally blog about it here.  Thanks for reading.

Drug Store Saga, Part III

Here's the belated but as-promised continuation of the Scale Structures Limited Drug Store project.  Let's start around back:

 
The windows and doors in this image are merely set in place for now to avoid dings while heavier construction continues.  The vertical gaps will be covered by drain pipes with scuppers near the top and the horizontal line will be hidden by a wide sign attached to the wall.  In this way the wall can remain removable to access wiring and details inside the building's second and third floors.  I had thought I might use magnets to hold the wall in place but a simpler solution will be sticky wax or even double sided tape.  Below, the view with wall removed:

Access granted.  You may proceed with detailing.

The above image shows the structure from beneath being braced before the brick had been applied.  I have since broken one joint in order to "straighten" one wall.  Just like real house construction, there's no such thing as a truly straight wall.  Everything must be shimmed and even then it doesn't quite make it true, plumb or square but in the end it looks pretty good.  More on shimming and imperfection in the next post where I discuss the fancy trim. <shudder>.

I'll close this post with an image I shared on Instagram recently.  I'm quite happy with how this little bar turned out.  The actual serving counter is complete as well but isn't shown here.  Still need to make bar stools and a display stand for the middle of the room but otherwise the detailing for the interior is coming along nicely.  Oh and of course it needs paint - that should go without saying but I'll mention it to be clear.  Probably a wood stain, but we'll see.